|
 Send
Enquiry Back
Next
Signal Converter / Isolator Modules
Applications
Technical
Specification Download
Catalogue
Description:
In the process control
and automation field, often the need arises of interfacing
low level signals generated by thermocouple, Pt-100,
load cell, current and voltage transducers, LVDT etc..
to the process controllers, PLC, DCS etc.. Also, one
signal needs to be fed to the multiple control device.
To take care of common ground loop of many sensors
to single system and also avoid loading effect, isolation
of these signal from one another is must. The models
featured here provides optical and/or galvanic isolation
between input and output, maintaining the desired
level of accuracy and linearity.
 APPLICATIONS
For conversion and isolation of low level dc signals
to (4-20)mA signal for interfacing to PLC, SCADA,
DCS etc..
TECHNICAL
SPECIFICATION
| Input |
Thermocouple,
RTD, Load Cell, Voltage and Current signals (AC/DC),
Frequency or Pulses |
| Output |
(4-20)mA, (0-10)V,
Frequency etc... |
| Isolation |
Optical for DC
signals and Galvanic for AC signals |
| Calibration |
On site using
ZERO / SPAN presets |
| Input/Output |
Single input
and 1 to 4 outputs (same or different type) |
| Supply Voltage |
110/230VAC, 50/60
Hz, 24VDC |
| Mounting |
35 mm, DIN rail |
| Operating /Storage
Temperature |
0-50° C Max.
/ 0-70° C Max. @ 10-85% Rh (Non-Condensing) |
| Size |
65x80x125 mm.
& 60x70x110 mm. |
DOWNLOAD
CATALOGUE
 indicates
- Product Catalogue
in PDF
format,
required: Adobe
Acrobat Reader
|
I1)
|
SIGNAL
CONVERTOR / ISOLATOR MODULES |
|
SEND
ENQUIRY
click here to Send Enquiry
or Request Information.
|
