₹5,775 – ₹7,350
Prices are inclusive of Delivery Charges.
POW-1-ZC – Single Phase Zero Cross Over Pulse Width Modulated SCR Power Switch.
Libratherm offers ready to use Zero Cross Over pulse width modulated SCR Power Switch model POW-1-ZC for single-phase electrical heating loads. This power module comprises of Libratherm make Triggering Card model LZF-1, which generates the zero cross over firing pulses to control suitably rated back to back connected SCRs mounted on the electrically isolated heat sink with suitably rated input and output heavy-duty connectors for heaters and AC power supply. The entire assembly is mounted in an MS powder-coated enclosure, which in turn can be easily mounted inside the closed control panel. This Thyristor Power Switch can accept analog and digital control signals from a DDC or PID controller to accurately control the heater power. Libratherm offers a complete ready to use control panel with a suitable PID/Program temperature controller as per the user’s specifications and requirements.
Parameters | Description |
---|---|
Available Ratings | 2KW to 8KW @ 230VAC or 4KW to 16KW @ 415/440VAC |
Available Configuration | Single phase with respect to neutral or two phase |
Control Action | Zero cross over Burst firing, time proportional with variable duty cycle. (Pulse width modulated - PWM) |
Control Signal | (4-20) mA / (0-5) VDC / (0-10) VDC / Potentiometer or 5-24VDC logic pulse. |
On/Off Duty cycle | 2 to 20 seconds (user adjustable) using on card potentiometer. |
Voltage Output | 0 to 230VAC variable on/off duty cycle proportional to the control signal. |
Max. Load Current | 10A @ 2KW, 20A @ 4KW, 30A @ 6KW and 40A @ 8KW |
Load Type | Suitable for Resistive and Inductive / Transformer load |
Supply Voltage | 230VAC +/- 10%, 50/60 Hz. |
Size | As mentioned in the Ordering Information table |
Mounting | On Base plate of the control panel. |
Model | Product Description | Size (H x W x D ) mm | Part No. |
---|---|---|---|
POW-1-ZC-20 | Single Phase Zero Cross Over Pulse Width Modulated SCR power switch for 2 to 4KW load (10 to 20A) @ 230VAC | 190 x 120 x 100 | 2701 |
POW-1-ZC-40 | Single Phase Zero Cross Over Pulse Width Modulated SCR power switch for 6 to 8KW load (30 to 40A) @ 230VAC | 190 x 130 x 110 | 2702 |