TDM-1000-3HP

Name: TDM-1000-3HP
SKU: 2157
Price: 9975 INR
Availability: InStock

₹9,975

Prices are inclusive of Delivery Charges.

TDM-1000-3HP – D.C. Motor Drive ¼ HP to 3 HP with isolated speed control signal.
Size (mm): 230 x 180 x 80
Part No: 2151

SKU: N/A Categories: DC Motor Controllers, Motor Controllers

Key Features

Fully solid-state design.
Linear variation of speed.
Suitable for 1/4 HP to 5 HP / single phase (4-wire or PMDC motors).
Adjustable maximum and minimum Speed.
Built in Current Limit / over Load Trip and Field Failure Protection.
Control signal is optically isolated in modular design.
Accepts speed control signal of (0-5) VDC, (0-10) VDC or (4-20) mA, hence suitable for machine automation.
1/4 DIN Size (TDM-10).
Operates on 230VAC.

Suitable for small machines in Plastic, Packaging and Pharmaceutical industries.
Applications where smooth steady and fine DC motor speed control is required.

Parametes	Description
Operating Supply Voltage	230 VAC / 115 VAC, 50 Hz, +/- 10%.
DC Output Voltage	1) Armature: 0 to 200VDC Field: 200 VDC fixed @ 230VAC.
	2) Armature : 0 to 100VDC Field : 100 VDC fixed @ 115VDC
Motor Load in HP	0.25 to 5 HP with Armature / Field or PMDC

Speed Control Signal	(0-5) VDC, (0-10) VDC, (4-20) mA optically isolated or through 10K single turn potentiometer.
Operating Temperature	0 oC to 70 oC.
Maximum Current Rating	25% of the rated value (continuous).
Front Panel LED Indication	For Power ON, Current Limit and Trip Relay
Isolation	DC control signal are optically isolated from Field/Armature voltage (hence safe to interface with PLC PID controller, etc.)
Over Load / Over Voltage Protection	Using Current Limit and Trip features and individual Fuse protection for Armature and Field winding. Potential free TRIP contact is available on the terminals.
Speed Regulation	+/- 10% of set speed. By Armature Feedback.
Current Limit	50 to 150% of the rated value.
Maximum Speed	50 to 100% of the rated value.
Acceleration / Retardation	2 to 15 seconds (adjustable soft start/stop).
Remote Start/Stop	Provision for external potential free input contact for starting and stopping the motor.
Size	230 x 180 x 80 mm
Mounting	TDM-1000 can be mounted on the flat surface inside the control panel using 4 screws.
Weight	Approx. 2.5 to 3.5 Kg

Sr. No.	Specifications	Part No.
1.1	1/4 HP to 3 HP DC Drive operating on 230VAC for PMDC motor with external speed control signal of 4-20mA/ 0-5VDC/0-10VDC.	2151-1
	(Max. Armature Current = 12.5Amp)
1.2	1/4 HP to 3 HP DC Drive operating on 230VAC for 4 wire (Armature + Field) motor with external speed control signal of 4-20mA/0-5VDC/0-10VDC.	2151-2
	(Max. Armature Current = 12.5Amp)
1.3	1/4 HP to 3 HP DC Drive operating on 115VAC for PMDC motor with external speed control signal of 4-20mA/ 0-5VDC/0-10VDC.	2151-3
	(Max. Armature Current = 25Amp)
1.4	1/4 HP to 3 HP DC Drive operating on 115VAC for 4 wire (Armature + Field) motor with external speed control signal of 4-20mA/0-5VDC/0-10VDC.	2151-4
	(Max. Armature Current = 25Amp)