₹15,225 – ₹25,725
Prices are inclusive of Delivery Charges.
DATALOG-804-F-8 – 8 Channel Temperature/Process Data logger with user defined Fixed inputs + 2 common relay outputs + 16 independent relay drivers + Real time clock + Built in Data storage memory + RS 485 serial interface.
DATALOG-804-U1 – 8 Channel Temperature/Process Data logger with user selectable Thermocouple and other process input + 2 common relay outputs + 16 independent relay drivers + Real time clock + Built in Data storage memory + RS 485 serial interface.
DATALOG-804-U2 – 8 Channel Temperature/Process Data logger with RTD (Pt-100) and other process input + 2 common relay outputs + 16 independent relay drivers + Real time clock + Built in Data storage memory + RS 485 serial interface.
Parameters | Description |
---|---|
No. Of channels | 8 |
Universal Input type 1 | Thermocouple J, K, R, S, T, E, N (4-20)mA, (0-5)V |
Universal Input type 2 | RTD(Pt-100), (4-20)mA, (0-1)V, (0-5)V |
Fixed Input types | Thermocouple J, K, R, S, T,E,N (4-20)mA, (0-1)V, (0-5)V or RTD (Pt-100) |
Input Selection | Factory set for each channel or User selectable for each channel (Model dependent) |
Range | 0 to 9999 or -9999 to +9999 UOM – Subject to the specified input |
(Refer the Input and range selection table given below) | |
Accuracy | Better than ± 0.1 ⁰C , ± 1 ⁰C (Software linearized for temperature) |
Display | 5 digit each 0.5” 7-segment Red /Green LED to indicate Process, Alarm values and Real Time Clock and 2 digit 0.3” 7-segment Red LED for channel no. |
Scan Rate | 1 to 99 sec (programmable through front panel keyboard) |
Data Storage Interval | 1 to 99 minutes (user programmable). |
Data Storage | 8000 records. (512KB). |
Print Interval | 1 to 99 minutes (User programmable) |
Skip/Hold Facility | Available through key board in configuration mode |
High / Low Alarm | Common or individual Settable using key pad |
Common Relay output | 2 nos. potential free change over contacts (1 each for high and low output but common for all the channels) |
Alarms Outputs (Optional) | 8 x 2 open collector outputs to drive external relay cards. |
LED Indication | 8 dual colour LED’s in the front indicating status of each alarm output. |
Serial Interface | RS485 MODBUS RTU protocol in slave mode for PC interface or RS232 serial port for dot matrix printer interface |
(any one is useable at a time) | |
Supply | 90V - 260VAC VAC ± 10% (10VA), 50/60Hz or 24VDC/AC @ 200mA |
Enclosure | Plastic or Metallic with ABS bezel and polycarbonate front. |
Size | 96 x 96 x 160 mm |
Size of Relay Card RLY-8 | 190 L x 120 W x 75 D mm (35 mm DIN rail mount) |
Code | Input | Range |
---|---|---|
A1 | Factory set to 8 universal inputs marked (*) below : A3,A4,A5,A6,A7,A16,A17 & A18 (U1) | As given below |
A2 | Factory set to 4 user selectable inputs marked (^) below : A14,A16,A17 & A18 (U2) | As given below |
A3 | J type : Fe/Con thermocouple (*) | 0 to 760 °C |
A4 | K type : Cr/Al thermocouple (*) | 0 to 1372 °C |
A5 | R type : Pt/PtRh13% thermocouple (*) | 0 to 1768 °C |
A6 | S type : Pt/PtRh10% - thermocouple (*) | 0 to 1768 °C |
A7 | B type : Pt30%Rh/Pt6%Rh thermocouple (*) | 200 to 1820 °C |
A8 | T type : Cu/Con thermocouple | 0 to 350 °C |
A9 | E type : NiCr/CuNi thermocouple | 0 to 900 °C |
A10 | C type : W5%Re/W26%Re thermocouple | 0 to 2300 °C |
A11 | D type : W3%Re/W25%Re thermocouple | 0 to 2300 °C |
A12 | G type : W/W26%Re thermocouple | 0 to 2000 °C |
A13 | N type : Ni-Cr-Si/Ni-Si-Mg | 0 to 1300 °C |
A14 | Pt-100 (Alpha = 0.00385) DIN 43760 (*)(^) | 0.0 to 400.0 °C |
A15 | Pt-100 (Alpha = 0.00385) DIN 43760 | -100.0 to 200.0 °C |
A16 | 4-20mA (*)(^) | -9999 to +9999 uom |
A17 | 0-1VDC (^) | -9999 to +9999 uom |
A18 | 0-5VDC (*) (^) | -9999 to +9999 uom |
Sr. No. | Model | Description | Part No. |
---|---|---|---|
1.1 | DATALOG -804-U1 | Input: Universal type 1 – Thermocouple types J,K,R,S,T,E,N and 4-20mA, 0-5V Output: 2 Common Relays Serial Interface: RS-232 for Printer Interface | 3381-1 |
1.2 | DATALOG -804-U1 | Input: Universal type 1 – Thermocouple types J,K,R,S,T,E,N and 4-20mA, 0-5V Output: 2 Common Relays Relay Drivers: 16 transistor output to drive external 16 channel relay cards Serial Interface: RS-232 for Printer Interface | 3381-2 |
1.3 | DATALOG -804-U1 | Input: Universal type 1 – Thermocouple types J,K,R,S,T,E,N and 4-20mA, 0-5V Output: 2 Common Relays Serial Interface : RS-485 for Computer Interface | 3381-3 |
1.4 | DATALOG -804-U1 | Input: Universal type 1 – Thermocouple types J,K,R,S,T,E,N and 4-20mA, 0-5V Output: 2 Common Relays Relay Drivers: 16 transistor output to drive external 16 channel relay cards Serial Interface : RS-485 for Computer Interface | 3381-4 |
2.1 | DATALOG -804-U2 | Input: Universal type 2:RTD (Pt-100), 4-20mA, (0-1)V, (0-5)V Output: 2 Common Relays Serial Interface : RS-232 for Printer Interface | 3382-1 |
2.2 | DATALOG -804-U2 | Input: Universal type 2 – RTD (Pt-100), 4-20mA,(0-1)V, (0-5)V Output: 2 Common Relays Relay Drivers: 16 transistor output to drive external 16 channel relay card Serial Interface : RS-232 for Printer Interface | 3382-2 |
2.3 | DATALOG -804-U2 | Input: Universal type 2 – RTD (Pt-100), 4-20mA,(0-1)V, (0-5)V Output: 2 Common Relays Serial Interface : RS-485 for Computer Interface | 3382-3 |
2.4 | DATALOG -804-U2 | Input: Universal type 2 – RTD (Pt-100), 4-20mA,(0-1)V, (0-5)V Output: 2 Common Relays Relay Drivers: 16 transistor output to drive external 16 channel relay card Serial Interface : RS-485 for Computer Interface | 3382-4 |
3.1 | DATALOG -804-F | Input: K type thermocouple + 4-20mA as fixed input for all 8 channels. Output: 2 Common Relays Serial Interface : RS-232 for Printer Interface | 3383-1 |
3.2 | DATALOG -804-F | Input: K type thermocouple + 4-20mA as fixed input for all 8 channels. Output: 2 Common Relays Relay Drivers: 16 transistor output to drive external 16 channel relay card Serial Interface : RS-232 for Printer Interface | 3383-2 |
3.3 | DATALOG -804-F | Input: K type thermocouple + 4-20mA as fixed input for all 8 channels. Output: 2 Common Relays Serial Interface : RS-485 for Computer Interface | 3383-3 |
3.4 | DATALOG -804-F | Input: K type thermocouple + 4-20mA as fixed input for all 8 channels. Output: 2 Common Relays Relay Drivers: 16 transistor output to drive external 16 channel relay card Serial Interface : RS-485 for Computer Interface | 3383-4 |
4.1 | DATALOG -804-F | Input: RTD(Pt-100) 2 or 3 wires + 4-20mA as fixed input for all 8 channels Output: 2 Common Relays Serial Interface : RS-232 for Printer Interface | 3384-1 |
4.2 | DATALOG -804-F | Input: RTD(Pt-100) 2 or 3 wires + 4-20mA as fixed input for all 8 channels Output: 2 Common Relays Relay Drivers: 16 transistor output to drive external 16 channel relay card Serial Interface : RS-232 for Printer Interface | 3384-2 |
4.3 | DATALOG -804-F | Input: RTD(Pt-100) 2 or 3 wires + 4-20mA as fixed input for all 8 channels Output: 2 Common Relays Serial Interface : RS-485 for Computer Interface | 3384-3 |
4.4 | DATALOG -804-F | Input: RTD(Pt-100) 2 or 3 wires + 4-20mA as fixed input for all 8 channels Output: 2 Common Relays Relay Drivers: 16 transistor output to drive external 16 channel relay card Serial Interface : RS-485 for Computer Interface | 3384-4 |
5.1 | MSI-RLY-8 | 8 channel relay card – compatible with DATALOG-804 | 3385-1 |