Temperature Indicator – DPI-966-T
₹6,825 – ₹8,400
Prices are inclusive of Delivery Charges.
Product Description:
DPI-966-T – Temperature and Process Indicator.
Configuration: (2 AI + 2 AO + 1 SO)
Size: 96 x 96 x 120
Part No: 1307
Download Catalog
Please refer the Ordering Information table before placing your order.
Key Features
- Microcontroller based Design.
- Software linearized for better measurement accuracy.
- Available in all standard DIN sizes.
- Works on universal 90-240 VAC.
- Universal and User selectable input from process transmitters/temperature sensors.
- Industrial standard Analog and Digital Interface.
Configuration
| AI | Analog Input from Process transmitter in the form of 4-20mA or from the Temperature Sensors. |
| AO | Analog Output proportional to Analog input, available in the form of Retransmission output of 4-20mA or optionally 0 -10V. |
| SO | Serial Output in the form of RS-485 on MODBUS RTU interface. |
Technical Specification
| Parametes | Description |
|---|---|
| Process Input 1 and 2 | 4-20mA or 0-10V |
| Display Range | -2000 to +2000 or 0 to 4000 count with programmable decimal point |
| Resolution | 0.1,0.01,0.001 |
| Temperature Input 1 and 2 | Thermocouple type – J, K, RTD(Pt-100) or R, S, B thermocouple (Any one to be specified by User – and not user selectable) |
| Temperature Range | As shown in the Ordering Information table. |
| Resolution | 1oC for thermocouples and 0.1oC for Pt-100. |
| Sampling rate / Display rate | The input is read @40mS / the display is updated @1 second. |
| Indicating Accuracy | +/- 1oC for Thermocouple throughout the range and +/- 0.1oC for Pt-100 for (4-20)mA or (0-10)V - absolute to the linear input signal |
| Display | 4 digit 0.5" Red 7-segment display for 1st Input reading. |
| 4 digit 0.5" Green 7-segment display for 2nd input reading. | |
| Settings | Using Front panel feather touch the keyboard to set various parameters like SPAN HI/LO values, MODBUS Slave ID, Input selection, calibration, etc |
| Retransmission Output (Analog) | 4-20mA linearized and proportional to the selected input type and range. Available for each Input. (Optional) |
| Digital Serial Interface | Optically isolated 2 wire RS485 over Modbus RTU protocol. (Slave mode with programmable Modbus address). (Optional) |
| Supply | (90VAC-250VAC), 50/60 Hz, 18 to 48VAC/DC (optional) |
| Size | 96 x 96 x 120 |
| Enclosure | ABS plastic with polycarbonate front graphic. |
Ordering Information
| Sr. No. | Specifications | Part No. |
|---|---|---|
| 1.1 | Input1 and Input 2 : J T/C with no interface | 1307-1 |
| 1.2 | Input1 and Input 2 : J T/C + Dual 4-20mA Retransmission | 1307-2 |
| 1.3 | Input1 and Input 2 : J T/C + RS-485 interface | 1307-3 |
| 2.1 | Input1 and Input 2 : K T/C with no interface | 1307-4 |
| 2.2 | Input1 and Input 2 : K T/C + Dual 4-20mA Retransmission | 1307-5 |
| 2.3 | Input1 and Input 2 : K T/C + RS4-85 interface | 1307-6 |
| 3.1 | Input1 and Input 2 : (Pt-100) with no interface | 1307-7 |
| 3.2 | Input1 and Input 2 : (Pt-100) + Dual 4-20mA Retransmission | 1307-8 |
| 3.3 | Input1 and Input 2 : (Pt-100) + RS-485 interface | 1307-9 |
| 4.1 | Input1 and Input 2 : (4-20)mA with no interface | 1307-10 |
| 4.2 | Input1 and Input 2 : (4-20)mA + Dual 4-20mA Retransmission | 1307-11 |
| 4.3 | Input1 and Input 2 : (4-20)mA + RS-485 interface | 1307-12 |
