₹2,950 – ₹3,200
Prices are inclusive of Delivery Charges.
TSC-309-S – SCR Firing / Tyristor Switch Card for Three Phase Capacitor Bank (Kathodic Firing) – Stud Mount
TSC-309-D – SCR Firing / Tyristor Switch Card for Three Phase Capacitor Bank (Kathodic Firing) – DIN Rail Mount
Libratherm offers SCR / Thyristor Switch Card TSC-309 which is specially designed for APFC (Automatic Power Factor Correction) applications to switch ON and OFF, three-phase capacitor banks, based on the command from the APFC relay module. These SCR/ Thyristor Switch Modules are developed to trigger solid state switch or silicon controlled rectifiers (SCRs) or thyristors. The gate/cathode triggering pulses are generated using zero cross over firing techniques. The two sets of gate/cathode pulses are galvanically isolated using the on card ferrite core pulse transformers.
Each card can simultaneously trigger 2 sets of back to back SCR+SCR modules or 2 sets of back to back SCR+Diode modules to switch 3 phase capacitor banks. TSC-309 accepts the control signal in the form of relay contact or DC pulse from the APFC relay unit. When the command is ON, capacitors banks are connected to the power lines, and when the command is OFF capacitor banks are disconnected.
The Capacitor Bank Switching Card TSC-309 card has the provision to accept 2 external thermostat contacts, which can be used to operate the cooling fan mounted on the heat sinks and to trip the circuit in case of overheating. On card LED indicates the on/off status of incoming DC power supply, ON/OFF status of capacitor banks, and status of heat sink temperature.
Normally, each of the power factor controllers gives 6 to 12 outputs to select that many capacitor banks of different KVAR depending on the total KVAR demand to maintain the unity power factor. Hence, for each output from APFC, it will be required to use 6 to 12 nos. of TSC-309 cards.
The APFC panel builders can use TSC-309 cards as an independent firing card and can wire the SCR modules separately mounted on the heat sink in the panel. The physical isolation of electronic cards and SCR modules makes the overall system safer, reliable and it becomes easy to maintain and service.
|Item||Zero cross over SCR Firing Card for 3 phase capacitor bank selection.|
|Model||TSC-309-S (Stud mounting) and TSC-309-D (DIN rail mounting) – Kathodic firing technique.|
|Control Command||10 to 24DC pulse or potential-free contact from the APFC relay module.|
|Triggering Pulses||Gate/ Cathode pulses - isolated from the Input –
suitable to fire 25A to 500A back to back connected SCR/SCR modules or
SCR/Diode modules G1K1+G2K2 and G3K3+G4K4.
|Triggering Technique||Guaranteed Zero cross over firing to prevent generation of transients during switching action.|
|Gate Current||Max. 350 mA.|
|Switching Time||Min. 100mS (5 AC cycles @ 50Hz line frequency).|
|Load Configuration||Single capacitor bank in 3 phase delta configuration.|
|Over Temperature Protection||Facility to accept 2 nos. of thermostat input for fan control and trip function.|
|LED Indications||For Power ON, THY1 ON, THY2 ON, FAN ON, CB ON, Over Temperature.|
|Aux. Supply Voltage||12VDC @ 700mA max. (TSC-309).|
|Three Phase Voltage||110 to 500VAC (Special cards are available for 690/750/1000VAC line supply).|
|Mounting (DIN rail) on Studs||It can be easily mounted on the 35 mm DIN rail or on the base plate.
TSC-309: (155 x 81)mm x 4nos. of M4 holes
|Card Size||165 (L) x 109 (W) x 60 (H) mm. (with DIN rail frame) – (TSC-309)|
|Model||Product Description||Part No.|
|TSC-309-S||SCR firing card for 3 phase capacitor bank (Kathodic firing) – Stud mount||2908|
|TSC-309-D||SCR firing card for 3 phase capacitor bank (Kathodic firing) – DIN rail mount||2909|